Types of Roofing Materials Used on a Commercial Roofing Project

Types of Roofing Materials Used on a Commercial Roofing Project

Roofing refers to the covering of the roof, which includes all structures and materials needed to support it on top of the buildings walls, on uprights, or over the existing roof. A roof cover, also called a roofing membrane, shingles, or slate is typically made of asphalt, clay, stone or slate and attached to durable materials that allow for it to be properly and efficiently repaired or replaced when needed. A roofing membrane is the top layer of a roofing structure, offering maximum protection from the elements while providing protection from direct light and rain. The types of roofing material include wood shakes, clay tiles, stone, ceramic tiles, metal shingles, ceramic tiles, and rubber tiles. A roofing system is the whole name for the entire roofing system of a home or business and is comprised of flashing, guttering, trusses, roofing shingles, and other roofing materials such as nails, screws, or nails and adhesives.

How To Handle Every Roofing Challenge With Ease Using These Tips

In some cases, the roofing system may consist of several different roofing materials such as slate, clay tile, stone, and gypsum. Slate is a very popular roofing material, being used in both commercial and residential applications. In residential homes, slate is often installed as an extra roof over an existing roof, serving as a layer of insulation, or used in cladding homes, sometimes containing water-based paints or finishes. One type of roofing material that is commonly used on businesses is metal roofing, which is installed over aluminum or steel shingles to create a smooth, waterproof surface. Metal roofing is especially popular in garages and industrial buildings, which are prone to extreme temperatures during the summer and harsh winter weather in the northern regions of the country.

If your commercial roofing project incorporates a metal roof deck, then you will also need to purchase roofing felt underlayment tar paper. These can be purchased in rolls of either green or yellow product, but the roll you buy should be able to provide adhesive flexibility and long-lasting protection. The felt is applied to the roofing section and allowed to sit for around 24 hours before being stacked on top of each other. Gather several sheets of roofing felt paper and roll them up, positioning them so that they are even with one another. The roofing felt underlayment tar paper acts as a barrier between the roofing materials and the roof deck shingles, ensuring that water cannot seep underneath the tar paper layer and cause damage to the roofing materials.

Leave a Reply

Your email address will not be published. Required fields are marked *

RSS
Follow by Email
LinkedIn
Share